W6011850 | Carbon dioxide incubator, 850 L capacity (WCI-850)
- Six-sided direct heating system provides rapid heat-up, fast temperature recovery and stable control
- Dry wall and air jacket minimises heat loss
- Dual beam IR CO2 sensor provides rapid and price measurement of CO2 regardless of temperature and humidity
- HEPA filtration on gas supply inlets
- Advanced PID temperature control
- Various options available
The WCI-850 CO2 incubator with 850 L capacity features six-sided direct heating to provide rapid heat-up and fast temperature recovery. A stable and precise chamber temperature is controlled and calibrated by 3 temperature sensors and advanced PID temperature control.
The concentration of CO2 in the chamber is monitored by a dual beam IR sensor. This system provides rapid and precise readings of concentration regardless of the temperature or humidity in the chamber.
A heated water tray in the bottom of the chamber creates humidity that is circulated by a fan to the entire chamber. A front door and frame heater prevent condensation in the chamber and on the glass door.
HEPA filtration is installed on gas supply inlets to ensure that clean gases are entering the chamber. Safety features include an alarm system to notify the end-user of high or low deviations in CO2 or temperature and an overheating system that automatically cuts power to the unit if the temperature exceeds the set point.
The following incubator options are available:
|W6011850||CO2 incubator, 850 L capacity, standard version|
|W6012850||CO2 incubator, 850 L capacity, with dry heat sterilisation*|
*Utilises dry air at up to 125°C for the sterilisation process.
|W6018501||Shelf, stainless steel, perforated*|
|W6011806||4W UV sterilisation lamp|
|W6011809||Remote monitoring system|
|W6011816||Port for auxiliary monitoring, 25 mm diameter, left side|
*The WCI-850 is supplied with 3 stainless steel shelves. It has a maximum capacity of 15 shelves.
|Chamber volume||850 L|
|Range||Ambient + 5°C - 60°C|
|Accuracy at 37°C||±0.1°C|
|Heating capacity||1400 W|
|Concentration range||0% - 20%|
|Accuracy (5% concentration at 37°C)||±0.1%|
|Sensor||IR CO2 sensor|
|Inlet pressure range||0.7 - 1.0 bar|
|Operating panel||Individual 2 channel touch button|
|Jacket type||Dry wall type (6-sided heating)|
|Chamber material||Stainless steel (304)|
|Shelf material||Perforated stainless steel|
|Number of shelves (supplied/total capacity)||3/15|
|Chamber dimensions (W x D x H)||700 mm x 800 mm x 1530 mm|
|Instrument dimensions (W x D x H)||820 mm x 930 mm x 1840 mm|
Advance Scientific Products Pty Ltd is based in Queensland and is focused on delivering high-quality products and service to our customers in the life, chemical and analytical sciences across Australia.
The company was established in 2013 by experienced instrumentation specialists to provide full distribution and customer support capability to manufacturers seeking to expand their activities in Australia without having to create their own sales and marketing infrastructure.
PO Box 746
Moffat Beach, QLD, 4551, Australia