BS-010120-AA4 | Shaker and heater for microcentrifuge tubes and PCR plates (TS-100)
- Ideal for 0.2 mL, 0.5 mL, 1.5 mL and 2.0 mL microcentrifuge tubes and 96 well PCR plates (unskirted or semi-skirted)
- Temperature control range from 5ºC above ambient up to 100°C
- Independent control of speed and temperature
- 2 mm orbital
- LCD display shows set and actual temperature as well as speed and time
- Can be used for heating or shaking or heating and shaking
- Shaking speed range from 250 rpm to 1400 rpm
- Temperature calibration function
- Timer sound signal
The compact TS-100 thermo shaker is the ideal solution for the shaking, heating, or shaking and heating of microcentrifuge tubes or PCR plates. Temperature, speed and time are all microprocessor-controlled.
The TS-100 has a 2 mm orbital and shaking speed can be varied between 250 and 1400 rpm. Temperature can be regulated from 5°C above room temperature up to +100°C. A temperature calibration function allows the end-user to calibrate the TS-100 by approximately ±6% of the selected temperature to compensate for differences in the thermal behaviour of tubes from different manufacturers.
A complete system includes the thermo shaker base unit and one of the five different easily-interchangeable blocks that are available for the TS-100. Blocks are sold separately from the thermo shaker base unit.
|Thermo Shaker base unit
|SC-18 | Block for 20 x 0.5 mL and 12 x 1.5 mL microcentrifuge tubes
|SC-18/02 | Block for 20 x 0.2 mL and 12 x 1.5 mL microcentrifuge tubes
|SC-24N | Block for 24 x 1.5 ml microcentrifuge tubes
|SC-24 | Block for 24 x 2.0 mL microcentrifuge tubes
|SC-96A | Block with lid for 96 x 0.2 mL well PCR plates (unskirted or half-skirted) or 8 x 12 0.2 mL strips
|2 line LCD
|Variable from 250 rpm to 1,400 rpm
|Temperature setting range
|+25ºC to +100°C
|Temperature control range
|5ºC above ambient up to +100°C
|Temperature accuracy at +37°C
|From 25°C up to 37°C in 6 minutes | From 25°C to 100°C in 15 minutes
across the block at +37°C
across the block at +100°C
|Temperature calibration coefficient range
|0.936 to 1.063 (±0.063)
|1 minute to 96 hours (1 minute increments)
|Maximum continuous operating time
|Dimensions (W x D x H)
|220 mm x 240 mm x 90 mm
|Input: 100 - 240 VAC: 50/60 Hz | Output: 12 VDC
Advance Scientific Products Pty Ltd is based in Queensland and is focused on delivering high-quality products and service to our customers in the life, chemical and analytical sciences across Australia.
The company was established in 2013 by experienced instrumentation specialists to provide full distribution and customer support capability to manufacturers seeking to expand their activities in Australia without having to create their own sales and marketing infrastructure.