W6013180 | Peltier-cooled carbon dioxide incubator, 180 L capacity (WCI-180P)
Key Features
- Six-sided direct heating system provides rapid heat-up, fast temperature recovery and stable control
- Peltier temperature control
- Dry wall and air jacket minimises heat loss
- Dual beam IR CO2 sensor provides rapid and precise measurement of CO2 regardless of temperature and humidity
- Outer silicon-packed magnetic door and inner tempered glass door
- Optional HEPA filtration available for gas supply inlets
- Advanced PID temperature control
- Heating of front door and frame prevents condensation in the chamber and on the glass door
- Options and accessories available (please see below)
Description
The WCI-180P Peltier-cooled CO2 incubator with 180 L capacity features six-sided direct heating to provide rapid heat-up and fast temperature recovery. A stable and precise chamber temperature is controlled and calibrated by 3 temperature sensors and advanced PID temperature control.
The concentration of CO2 in the chamber is monitored by a dual beam IR sensor. This system provides rapid and precise readings of concentration regardless of the temperature or humidity in the chamber.
A heated water tray in the bottom of the chamber creates humidity that is circulated by a fan to the entire chamber. A front door and frame heater prevent condensation in the chamber and on the glass door.
Optional HEPA filtration can be installed on the gas supply to ensure that clean gases are entering the chamber. Safety features include an alarm system to notify the end-user of high or low deviations in CO2 or temperature and an overheating system that automatically cuts power to the unit if the temperature exceeds the set point.
Options
The following Peltier-cooled incubator options are available:
Part Number | Description |
W6013180 | CO2 incubator, 180 L capacity, standard version |
W6014180 | CO2 incubator, 180 L capacity, with dry heat sterilisation* |
*Utilises dry air at up to 125°C for the sterilisation process.
Accessories
Part Number | Description |
W6011801 | Shelf | stainless steel | perforated* |
W6011802 | Roller base | platform height is 200 mm above bottom of cabinet |
W6011813 | Divided glass door | 3 sections |
W6011803 | Stacking kit |
W6011806 | 4W UV sterilisation lamp |
W6011804 | HEPA filtration |
W6011805 | Water pan | 230 mm x 160 mm x 50 mm |
W6011809 | Remote monitoring system |
W6011810 | Gas regulator |
W6011811 | CO2 analyser |
W6011816 | Port for auxiliary monitoring | 30 mm diameter | left side |
W6011815 | Printer |
189143-01 | Stacking kit |
*The WCI-180P is supplied with 3 stainless steel shelves. It has a maximum capacity of 8 shelves.
Specifications
Manufacturer | Wiggens |
Model number | WCI-180P |
Chamber volume | 180 L |
Temperature Parameters | |
Range | +20°C - +60°C |
Stability at 37°C | ±0.1°C |
Resolution | 0.1°C |
Control | Digital PID |
Uniformity | ±0.3℃ (37℃/RT.20℃) |
Heating capacity | 320 W |
CO2 Parameters | |
Concentration range | 0% - 20% |
Accuracy (5% concentration at 37°C) | ±0.1% |
Resolution | 0.1% |
Sensor | IR CO2 sensor |
Control | Microprocessor |
Inlet pressure range | 0.3 - 0.5 bar |
Display | LED display |
Operating panel | Individual 2 channel touch button |
Jacket type | Dry wall type (6-sided heating) |
Chamber material | Stainless steel (304) |
Shelf material | Perforated stainless steel |
Number of shelves (supplied/total capacity) | 3/8 |
Chamber dimensions (W x D x H) | 473 mm x 528 mm x 710 mm
|
Instrument dimensions (W x D x H) | 560 mm x 680 mm x 945 mm
|
Weight | 88 Kg |
Power requirements | 230 VAC: 50/60 Hz |
About Us
Advance Scientific Products Pty Ltd is based in Queensland and is focused on delivering high-quality products and service to our customers in the life, chemical and analytical sciences across Australia.
The company was established in 2013 by experienced instrumentation specialists to provide full distribution and customer support capability to manufacturers seeking to expand their activities in Australia without having to create their own sales and marketing infrastructure.
Products
Useful Links
Contact
PO Box 746
Moffat Beach, QLD, 4551, Australia