BS-050108 | Photometer for 96 well microplates








Key Features

  • Optimised for  ELISA and microbiological studies in 96 well microplates or strip-well plates
  • Ideal for endpoint, kinetic and  multiplex measurements. Up to 7 assays can be run on one microplate.
  • Absorbance detection mode
  • 8 silicon photodiode detectors
  • Self-calibrating LED light sources
  • 8-position filter wheel with four standard emission filters. Other filter options available (please see below).
  • Full computer control with QuantAssay acquisition and analysis software
  • Compatible with IDEXX xChekPlus™ software

Description

The Biosan HiPo MPP-96 microplate photometer uses photodiode detectors and self-calibrating LED light sources to allow endpoint, kinetic and multiplex measurements to be made from samples in standard 96 well microplates or strip-well plates. The instrument has an 8-poistion filter and is supplied with four standard filters with a wide range of optional filters also  available (please see below).

The HiPo MPP-96 is fully computer-controlled and is supplied with the QuantAssay acquisition and analysis software. Key capabilities of the QuantAssay software include:

  • ELISA assays of any complexity can be carried out using the Assay Editor and Assay Wizzard
  • Quantitative assay includes up to 20 standards
  • Avidity/Affinity assays
  • Multiplex assays with up to 7 assays on one plate
  • Qualitative assay includes up to 11 controls
  • BestFit function for selecting the best calibration curve
  • User friendly interface
  • Save, load and export results
  • Create visual reports

The instrument is also compatible with the IDEXX xChekPlus™ software.

Optional Filters

The following optional emission filters are available for the HiPo MPP-96:

Part Number
Item Description
400
400 nm emission filter
455
455 nm emission filter
458
458 nm emission filter
460
460 nm emission filter
470
470 nm emission filter
480
480 nm emission filter
486
486 nm emission filter
488
488 nm emission filter
500
500 nm emission filter
508
508 nm emission filter
510
510 nm emission filter
515
515 nm emission filter
520
520 nm emission filter
532
532 nm emission filter
535
535 nm emission filter
540
540 nm emission filter
546
546 nm emission filter
550
550 nm emission filter
560
560 nm emission filter
568
568 nm emission filter
580
580 nm emission filter
589
589 nm emission filter
594
594 nm emission filter
600
600 nm emission filter
610
610 nm emission filter
632
632 nm emission filter
636
636 nm emission filter
640
640 nm emission filter
647
647 nm emission filter
650
650 nm emission filter
656
656 nm emission filter
660
660 nm emission filter
671
671 nm emission filter
676
676 nm emission filter
680
680 nm emission filter
685
685 nm emission filter
690
690 nm emission filter
694
694 nm emission filter


Specifications

Detection mode
Absorbance
Light source
Self-calibrating LEDs
Photodetector
8 silicon photodiodes
Compatible plate type
Standard 96-well microplates and strip-well microplates
Reading speed
5-8 seconds per wavelength
Measurement modes
Endpoint, kinetic and multi-label measurements
Measurement channels
8
Reference channel
1
Measurement range
0 – 4.3 OD (with standard preinstalled filters 0-3.5 OD)
Resolution
0.0001 OD
Accuracy
(405 nm, 450 nm, 492 nm and 620 nm)
0.000 - 2.000 OD: ≤0.5% ±0.010 OD
2.000 - 3.000 OD: ≤1.0% ±0.010 OD
Precision/ reproducibility
(405 nm, 450 nm, 492 nm and 620 nm)
0.000 - 2.000 OD: ≤0.5% ±0.005 OD
2.000 - 3.000 OD: ≤1.0% ±0.005 OD
Wavelength range
400 – 700 nm
Wavelength selection
8-position filter wheel with four standard filters (405 nm, 450 nm, 492 nm and 620 nm). Additional filters available (please see above).
Shaking speed/ control range
4 amplitudes, 4 speeds
Software
Supplied with QuantAssay control and analysis software. Compatible with IDEXX xChekPlus software.
PC system requirements
Intel/AMD Processor, 1 GB RAM, Windows Vista/7/8/10, USB
Dimensions (W x D x H)
140 mm х 300 mm х 130 mm
Weight
4.6 Kg
External power supply
Input: 100 - 240 VAC: 50/60 Hz | Output: 12 VDC


About Us

Advance Scientific Products Pty Ltd is based in Queensland and is focused on delivering high-quality products and service to our customers in the life and analytical sciences across Australia.

The company was established in 2013 by experienced instrumentation specialists to provide full distribution and customer support capability to manufacturers seeking to expand their activities in Australia without having to create their own sales and marketing infrastructure.