6111 1090 1 | UVILink ultraviolet crosslinker with 254 nm, 312 nm and 365 nm UV emitting options

Key Features

  • Programmable microprocessor control
  • Stainless steel irradiation chamber
  • UV energy monitored automatically
  • UV-blocked observation window and safety interlock
  • Membrane keypad operation and clear LED display
  • Can be supplied with UV bulbs emitting at 254 nm, 312 nm and 365 nm. Bulbs can be easily interchanged by the end-user.


The UVILink CL-508 crosslinker from UVITEC is a fully microprocessor-controlled irradiation system that can emit UV at 254 nm, 312 nm or 365 nm and has been specifically designed to give the best possible results when binding nucleic acids to membranes. The optimum ultraviolet level can be set using the membrane switch keypad in either energy units (Joules) or time (seconds). There are nine possible pre-sets for energy exposure and nine pre-sets for time exposure as well as manual user selection.

The CL-508 is a compact unit with a safety interlock on the access door to prevent the door from being opened during operation. The door also contains an observation window that is UV-blocked for operator protection. The ultraviolet energy generated by the unit is continuously monitored by a photo-feedback system which compensates for variation in output from the UV sources. In this way consistency of operation and maximum efficiency are maintained.

UV Bulb Options

The following UV bulbs can be used with the crosslinker and are easily interchanged by the end-user. Please indicate which wavelength of bulb(s) you require when purchasing the crosslinker.

Part Number
6110 1091 1
UV tubes for UVILink crosslinker | 254 nm | 8W | Set of 5 tubes
6110 1092 1
UV tubes for UVILink crosslinker | 312 nm | 8W | Set of 5 tubes
6110 1093 1
UV tubes for UVILink crosslinker | 365 nm | 8W | Set of 5 tubes
UV source 5 x 8 W bulbs
Time exposure (max.)999.9 minutes
Energy exposure (max.)99.99 Joules
Measurement ranges0 - 9.999 Joules and 0 - 99.99 Joules
ControlPre-set or manual controls for both energy and time exposure. Nine presets for both energy and time exposure.
Dimensions (internal)260 mm x 330 mm x 145 mm (W x D x H)
Dimensions (external)350 mm x 360 mm x 305 mm (W x D x H)

Back to home page

About Us

Advance Scientific Products Pty Ltd is based in Queensland and is focused on delivering high-quality products and service to our customers in the life, chemical and analytical sciences across Australia.

The company was established in 2013 by experienced instrumentation specialists to provide full distribution and customer support capability to manufacturers seeking to expand their activities in Australia without having to create their own sales and marketing infrastructure.


PO Box 746
Moffat Beach, QLD, 4551, Australia